Diodino
LET’S SAY HELLO TO YOUR DISPLAY

A few steps.
A whole lot of possibility.

Enter the six-digit code shown on your display to unlock your features and weekly schedule. Then add Diodino to your phone’s Home Screen.

1. Create account2. Connect display3. Add to Home Screen

Connect your display first.

Your display’s code links it to your account and unlocks the app. Power it on, connect it to Wi-Fi, then enter the six-digit code below. Once connected, we’ll show you how to add Diodino to your Home Screen, including a short video.

First, a little connection.

  1. 1
    Power on your display

    Its setup screen shows a network called Matrix-XXXX. Use the Wi-Fi password on its setup card.

  2. 2
    Join the display’s Wi-Fi

    Open your phone’s Wi-Fi settings and join that network. Stay connected if your phone says there is no internet.

  3. 3
    Choose your home Wi-Fi

    The setup page should open automatically. If it doesn’t, open 192.168.4.1 ↗. Choose your 2.4 GHz home network and enter its password.

  4. 4
    Return to Add Display

    Reconnect your phone to home Wi-Fi, return to Add Display in the app, then enter the six-digit code shown on your display.

THE LAST LITTLE STEP

This one’s yours.

Your screen will show a code after it connects. That code links the display to your account.

Local PC setup details

Your PC and display must be on the same home network. Keep Diodino running on this PC. The board needs the matching firmware before it can show a pairing code.

Checking your PC’s address…

Use this server address in the firmware/setup page. Your home Wi-Fi password stays on the display.